what size audio cord do i need to hook to my volkswagen

1998-2010 Volkswagen Beetle

Upgrading the stereo system in your Beetle
1998 • 1999 • 2000 • 2001 • 2002 • 2003 • 2004 • 2005 • 2006 • 2007 • 2008 • 2009 • 2010

In brief: This Crutchfield Research Garage article gives you an overview of your Protrude'due south stock stereo system and your aftermarket upgrade options. Use our vehicle selector to notice the gear that volition fit your auto.

Overview of the Volkswagen Beetle

Designed to capitalize on the immense popularity of the original VW Beetle, the New Protrude made its bubble-topped debut in 1998. The vehicle remained largely unchanged throughout its production run, which lasted until 2010, when it was finally retired and replaced by an all-new design. The New Beetle was available in ii flavors – coupe and convertible.

The standard Beetle radio (Crutchfield Research Photo)

Manufacturing plant stereo system

The vehicle was also made bachelor with two different audio systems. The standard audio organisation included an AM/FM/cassette actor with vi speakers.

The upgraded system included an AM/FM/CD player with MP3 capabilities and an auxiliary nuance input, as well equally a 10-speaker Monsoon Sound System. The Monsoon system was not available in the 98-99 models.

If yous're in the market to upgrade your Beetle'southward sound organization, the good news is that a number of very cool receivers are available. Radios with fold-downward faces are not recommended for this motorcar, simply a lot of single-DIN receivers volition piece of work nicely. Replacing the speakers can be a claiming, peculiarly if you're upgrading the Monsoon Organization.

The Monsoon stereo (Crutchfield Research Photo)

Replacing your factory radio

Whether you have the standard organisation or the Monsoon system, replacing the receiver is the aforementioned process. The departure comes into play when replacing the speakers in the Monsoon arrangement. Nosotros'll cover that below.

Important note: If yous remove the receiver while the security system is armed, it will disable the starter on the motorcar. To disarm the system, put the master central into the driver's side door, plough it to lock, and so unlock the door.

To showtime the receiver replacement procedure, you'll need a pair of VW OEM radio removal tools (which are available with most stereo purchases from Crutchfield). Slide the two VW radio removal tools into the slots on the correct and left side of the mill receiver. Gently push the tools in until you hear a click. The click is the sound of the organisation unlocking.

Pull the tools out slowly, and the receiver will come up with them. Hold the receiver with 1 hand and disconnect the wire harness and antenna cable from the rear of the unit of measurement. Remove the two T-15 Torx bolts from the interior mounting bracket.

Detailed stereo and speaker removal instructions

With step-by-stride disassembly instructions and enough of up-close, detailed photos, our sectional Crutchfield MasterSheet™ takes the guesswork out of removing the factory stereo and speakers. Information technology's free with your Crutchfield social club, or y'all tin buy one separately for just $9.99.

Install your new receiver mounting bracket and attach the two T-fifteen Torx bolts, then insert and secure the receiver's metallic mounting sleeve. Next, connect the wiring adapter harness to the new receiver's wires; this will let you lot plug the new stereo into the Beetle's stereo connector.

The Beetle uses a non-standard antenna connexion, so you'll need an adapter for that, as well. This antenna adapter besides has a wire that needs to exist connected to the new receiver's power antenna wire. These ii wiring adapters and the mounting kit are bachelor at a deep discount with almost stereo purchases from Crutchfield.

Plug in the antenna adapter and the wiring harness, slide the receiver into the sleeve, and test the stereo to ensure it works. If the new unit of measurement operates correctly, install information technology in the dash and snap the stereo'south trim band into place.

This is a tight infinite, and installing a new stereo tin can be frustrating. According to i of our practiced installers, the key is to feed the mill harness back into the radio cavity, with the adapter harness connected. Information technology's a tight fit, but it will go back in there. One time the harness is tucked into the nuance cavity, leave simply enough length to connect the new radio to its harness. Brand sure the harness is neatly bundled, too, because there's no room to jam an unruly nest of wires into this space. This volition take some patience, of grade, simply it'southward do-able.

Note: If your Beetle is equipped with OnStar, you might lose that feature when you install a new aftermarket receiver.

Tools needed: VW OEM radio removal tools, Torx driver and T-15 Torx bit, small-scale flat-blade screwdriver

Shop for machine stereos that fit your Volkswagen Beetle

Replacing your manufactory speakers

The caste of difficulty involved in replacing your Beetle'due south speakers depends on which manufacturing plant organization you're working with.

Standard arrangement speakers

The standard stereo system has six speakers, located in the doors, front pillars, and rear panels. See below for details on the Monsoon system.

Front door speaker (Crutchfield Enquiry Photo)

Door speakers: You lot can cull from many half dozen-i/2" or 5-1/4" speakers to supplant the mill speakers. You'll need a mounting bracket and wiring adapter for each speaker, and these are available at a discounted price when you purchase your speakers from Crutchfield.

Getting to the door speakers requires that you remove the door panels. Beginning by removing the encompass for the door handle, then remove the two Phillips head screws holding the door pull in identify. Depending on the model year of your Beetle, you'll remove either two or three T-20 screws at the bottom of the panel.

Starting from the bottom of the door console and working up both sides, pry the panel away from the door using a console tool. You lot'll be releasing vi retaining clips as yous work around the door. Once the clips are released, lift off the door panel. Remove the door release cablevision and disconnect the wiring harness, then gear up aside the door panel.

The speakers are riveted in place, and so you'll have to drill out the rivets then drill new screw holes for your new speakers. This might sound daunting, only if you have your time and drill advisedly, it'll be polish sailing. Drill out the rivets that concord the speaker assembly in place using a three/eight" bit.

Next, pull the associates away from the door, disconnect the wiring harness, so remove the remains of any rivets with the nail punch. Attach the new speaker to the mounting bracket and use this associates to marker the spots for the new mounting holes, and so drill them out using a 1/8" bit. Put it all back together by reversing the directions above.

Tools needed: Panel tool, Phillips screwdriver, Torx driver and T-twenty Torx bit, drill and one/8" and 3/8" bits, nail dial

The tweeter, still attached to the pillar trim (Crutchfield Research Photo)

"A" pillar speakers: The VW Protrude has pocket-sized tweeters mounted on the A-pillars. To replace these small speakers, you will demand to release the three plastic clips that run the length of the pillar trim cover and so pull the colonnade cover tabs (ii at the lesser) loose. Disconnect the wiring harness from the tweeter. Y'all'll need to drill out the rivets belongings the speakers in identify and then replace them.

To mount them, you'll need a ready of our universal backstraps and to connect them, you lot'll want to use Posi-Products connectors. Otherwise, you'll accept to fabricate your own bracket and splice into the factory wiring.

Rear speakers (coupe): The factory speaker size is 6-three/4" and nigh aftermarket speakers that size will fit the location. You tin too apply a 6-1/2" or 5-1/4" speaker with the help of a mounting bracket. This bracket and the necessary wiring adapter are included free from Crutchfield.

The rear speaker location in the coupe (Crutchfield Inquiry Photograph)

Replacing the rear speakers in the Beetle coupe is relatively straightforward. You'll need to release six plastic retaining clips and 1 metal prune by prying along the side and lesser of the rear side trim console. One time the clips are released, elevator the console out of the fashion. You can fold the seat down flat to get amend access to the dorsum corner.

Once the panel is out of the way, remove the iv Phillips caput screws holding the speaker associates in place, and disconnect the wiring harness. Remove the mill speaker, then install your new speaker and connect the wiring harness. Reverse the steps higher up to replace the trim panel.

Tools needed: Panel tool, Phillips screwdriver

Rear speakers (convertible): Replacing the rear speakers on the VW Protrude convertible requires a bit more endeavor than the coupe. The factory speaker size in the convertible is also 6-iii/four", but in this case, mounting depth is more limited, so not many replacement speakers of this size will fit. As with the coupe, you tin go with 6-1/2" or five-one/4" speakers instead, and utilize a mounting bracket to brand them fit properly.

The get-go step is to open the top, then fold the rear seat lesser cushion and remove it. Both headrests will too have to be removed. At the border of the seat dorsum cushion, you'll find three 6mm Allen screws that must exist removed. Remove the trunk admission panel and and then the rear seat back cushion. At that place is one 10mm nut that must exist removed at the top rear of the rear side panel.

Now, remove the rear side panel past releasing the retaining clips (pry out at the front end bottom edge). Do the same for the rear edge and and so pull the panel out. You'll need to remove the cable end, every bit well as the cablevision finish stud to the convertible top comprehend, and so disconnect the flap motor and tweeter harness.

In that location are four T-20 Torx screws holding the speaker in place, and you lot'll need to remove these. Pull out the assembly, disconnect the speaker and replace it with your new speaker. Follow these steps in reverse to reinstall the trim panels, top cover cable and seat cushions/backs.

Tools needed: Panel tool, Phillips screwdriver, 10mm socket plus a ratchet and extension, 6mm Allen wrench, Torx commuter and T-20 Torx scrap

Monsoon arrangement speakers

The Monsoon organisation adds several challenges to the process of speaker replacement. The speaker configuration is similar to the standard organisation, with the add-on of two sets of tweeter-and-woofer components in the dash. All of the speakers are powered by a Monsoon amplifier located in the rear cargo area. Overall, replacing any of the forepart speakers volition be difficult.

Also note that if you supercede the Monsoon organisation's low-impedance speakers with standard iv-ohm speakers, you'll notice a real loss of volume. Go along this in mind when y'all're shopping for speakers.

Door speakers: The doors hold 8" woofers riveted in place. Replacement is hard because there are no brackets available to help mount a standard-sized speaker. Further, this speaker simply receives bass frequencies, so when yous supercede information technology, the new speaker volition besides only produce bass.

Dash speakers in the Monsoon organisation (Crutchfield Inquiry Photograph)

"A" pillar speakers: Notes for these tweeters are the same as in the standard speaker organization. They're easy to go to, but hard to replace.

Dash speakers: The dash speaker location contains a set of separates (a tweeter and midrange woofer) on each side of the nuance, near the corner. Getting to them is easy, but replacement volition require some piece of work and yous'll need to create custom brackets or use a gear up of our universal backstraps.

Finding new speakers to fit the location will also exist challenging. The manufacturing plant iii" woofer and i.34" tweeter are located in very shallow spaces. The woofer'south available clearance is only 1-3/8" deep and the mounting peak is a mere 1/4". Like the tweeters in the A-colonnade, you're better off simply leaving these alone.

Rear speakers: Replacing the rear speakers in the Monsoon arrangement is just like replacing those in the standard system. Mounting brackets and adapter harnesses are bachelor for this location, and you can choose from six-3/iv", half-dozen-i/2", or v-1/4" sizes.

All things considered, replacing the speakers in Beetles with the Monsoon organization volition be more challenging than it would be in almost other vehicles. Not-standard sizes and arrangements are the biggest hurdle.

Shop for speakers that fit your Volkswagen Beetle

Bass in your VW Protrude

Space in the back of the Beetle is tight, but there is certainly room for a very small subwoofer box or a powered subwoofer back there.

Other options for your Beetle

Here are another upgrade ideas for your Protrude:

iPod and auxiliary input adapters

If y'all intend to keep your manufacturing plant stereo, but would like to add an iPod connection or an auxiliary input, there are adapters available. Yous'll yet need to remove the stereo in order to connect either of these adapters, so just follow the process outlined above.

Security

Installing a security organization in your Protrude isn't piece of cake (security systems rarely are), only information technology'south definitely a good idea. Our Crutchfield Advisors tin aid figure out what you demand to get the job done, only we commonly recommend taking your car and new gear to a professional installer.

Shop for car security systems for your Volkswagen Beetle

Find the audio gear that fits your car or truck

Visit our Outfit My Motorcar page and enter your vehicle data to see stereos, speakers, subs, and other audio accessories that will work in your vehicle.

bouchardniae1971.blogspot.com

Source: https://www.crutchfield.com/ISEO-rgbtcspd/learn/1998-2010-volkswagen-beetle.html

Share this post